Stage 2 is over 3 has started

[bwhite]

Stage 2 is over and stage 3 has started. Everyone should read the info in the following link:

http://www.chessbrain.net/bbs/viewtopic.php?t=660

Lets get going early and kick some butt in stage 3!!! :!: :idea: :D

There is already an AMD Users Team created so just sign up and go. I have been running the new client for about 36 hrs now and seems to be fairly stable.

Here is a link with some good instructions on how to get stage 3 up and running:

http://www.chessbrain.net/WebRegistration.html

[vaughan]

Don't forget to register EACH computer you run ChessBrain v3 on. When you've downloaded and installed it and it starts running you have to click on File -> Register and enter the e-mail address you used when you registered at the chessbrain site.

[jlangner]

How long does it take to get the password emailed to you. 1 hour and counting here.

[Bionic_Redneck]

might have been a typo because mine was recieved in seconds

[jlangner]

no because I made a another one using another email I have and have not recieved it either. If you or anyone else can try to create a new one or another using another email you have and see if works for you. Maybe overloaded today?

[jlangner]

k, never got email but put in my email address and it worked. Once launched this is far as it goes after 45 minutes. Is this right?

0125-124503| ChessBrain PeerNode Client
0125-124503| Platform: ix86 Generic running pc-windows
0125-124503| Version: v3.0124.01
0125-124503| Network monitor server at: 0.0.0.0
0125-124503| Initial bootstrap process complete.
0125-124503| Initialization complete.
0125-124503| Searching for route to SuperNode server...
0125-124503| Using route 64.71.165.209.
0125-132318| Searching for route to SuperNode server...
0125-132318| Using route 64.71.165.209.

[jlangner]

BTW, did anyone change their uid in config file? said to use id# now and not user id.

CBSPN Server
# configuration file (version 3)
#

# The uid (UserID) is the registered ID of a user.
# IMPORTANT: the uid is no longer a name or email address.
# You must be a registered member to retrieve a UID. Make sure you
# sign up at: http://www.chessbrain.net/member
#
# To retrieve your UID visit the following URL
# and replace user@domain.com with your email address:
#
# http://www.chessbrain.net/member/getmemberid.php?user=user@domain.com
#
# The return is XML, so you may have to view source on the browser page!
#
uid=532

[bwhite]

k, never got email but put in my email address and it worked. Once launched this is far as it goes after 45 minutes. Is this right?

0125-124503| ChessBrain PeerNode Client
0125-124503| Platform: ix86 Generic running pc-windows
0125-124503| Version: v3.0124.01
0125-124503| Network monitor server at: 0.0.0.0
0125-124503| Initial bootstrap process complete.
0125-124503| Initialization complete.
0125-124503| Searching for route to SuperNode server...
0125-124503| Using route 64.71.165.209.
0125-132318| Searching for route to SuperNode server...
0125-132318| Using route 64.71.165.209.


Looks right to me. I have 5 nodes running and the last work any of them did was between 0830 and 0900 this morning. Since then they just seem to check in with the server every now and then. Just leave it run and should go when the server starts sending out work again.

Yes I did do the UID thing. I don't know if it means anything with the newest client but I did it anyway.

[chaz]

Looks like all mine quit working about midnight, i also did the UID thing and have registered, but no email....
Only been running it for about 24hrs now though, maybe theyre just swamped.

[jlangner]

Mine stopped running as well. I never got my email either. Stats haven't updated since yesterday a.m. either.

[bwhite]

The latest version of the client (v3.0126.02) posts your UID in registry when you initially register your client and also shows it when you start the client. Hopefully this is the last version for a while as ChessBrain has left for Denmark for the record attempt. Here's what mine look like when I start them:


0126-205922| ChessBrain PeerNode Client
0126-205922| Platform: ix86 Generic running pc-windows
0126-205922| Version: v3.0126.02
0126-205922| Network monitor server at: 127.0.0.1
0126-205922| Initial bootstrap process complete.
0126-205922| User account set to: 132
0126-205922| Initialization complete.
0126-205922| Searching for route to SuperNode server...
0126-205923| Using route 64.71.165.209.

That's all it should do until there is work to do...which is supposed to be wed. Read more about it here:

http://www.chessbrain.net/bbs/viewtopic.php?t=669

Hope this helps everyone. :)

As for the email thing I don't know??? I made up my password when I registered. I then went back to join AMD Users and found we didn't have a team yet for stage3 so created it. When there was work it did count for me and for AMD Users so it must be OK. All this and I still have not received an email from ChessBrain :?: :?:

[Anonymous]

ok i ve been running this all week and still am not listed in the stats, here is my cbspn.conf, maybe somebody can tell me what i did wrong?

#
# CBSPN Server
# configuration file (version 3)
#

# The uid (UserID) is the registered ID of a user.
# IMPORTANT: the uid is no longer a name or email address.
# You must be a registered member to retrieve a UID. Make sure you
# sign up at: http://www.chessbrain.net/member
#
# To retrieve your UID visit the following URL
# and replace user@domain.com with your email address:
#
# http://www.chessbrain.net/member/getmemberid.php?user=user@domain.com
#
# The return is XML, so you may have to view source on the browser page!
#
uid=568

# Proxy Server
# If you're using a Proxy Server enter the IP address and Port below
#proxyaddr=192.168.1.1
#proxyport=6738
proxyaddr=*
proxyport=*


# PeerNode Network Monitor Server
# Enter the IP address of the PeerNode Network Monitor Server
# The server uses port 3434, so you may need to open it on your firewall
# Use an IP address such as 127.0.0.1 if you're running a PeerNode monitor
# Use netmon=* if you are *not* running a PeerNode monitor. If you set an
# IP address and you're not running a monitor - then you'll actually slow
# down your client as it tries to connect to a monitor that isn't running!!
#netmon=*
netmon=127.0.0.1


Chaz

[jlangner]

Stats have not updated since 1/26/04, thats probably why.

[Anonymous]

ok im there now

[vaughan]

Anyone getting any joy out of this appln now?

I get this:
0202-164822| Searching for route to SuperNode server...
0202-164822| Using route 64.71.165.209

It might be because they're returing from Denmark but it would've been nice to be told.

[chaz]

Nothing, nada.......

[jlangner]

I get same - You are probably right in that they are returning so down.

[Bionic_Redneck]

new linux client v3.0129.01 and it work just no work to do I suppose :!:

[em99010pepe]

Nothing, nada.......

Nada is nothing in portuguese. Very good.