Senior Post Whore
He even ran the four of them simultaniously! Huge credits to the Intel Core i3-2100.
I built his system with 16 GB of Corsair 1600 MHz RAM, think I'll reward him with 16 GB more...
Cooling done with a Cooler Master Hyper 212 Evo for the CPU and two Corsair AF140 140mm top fans, besides the 140mm intake and 120mm exhaust of the Corsair Carbide 300R casing.
Last edited by Dirk Broer; 02-22-2016 at 01:24 PM.
Motivator & Enthusiast
Moderator
Jason1478963 has decided to help us make a dent in our standings. He must of dropped everything to help, He is putting out some serious numbers on this project. He is actually putting out 4 to 5 times What I thought would seriously help. That is a lot of electricity for his crunchers!
Challenge me, or correct me, but don't ask me to die quietly.
…Pursuit is always hard, capturing is really not the focus, it’s the hunt ...
Senior Member
I only put a few on it that could actually run it while I ran out my wcg work units. I seem to have an issue with my server as my 200 core server setup couldn't run a single work unit. I didn't get time to check but i'm wondering if it is missing 32 bit libraries.
Last edited by Jason1478963; 02-22-2016 at 10:24 PM.
Senior Post Whore
I normally run this on my three -32 bit- Raspberry Pi's, so it's quite possible that not having the 32-bit libraries is a show stopper for Enigma.
Senior Member
I installed 32 bit libs on one of the blades and so far it seems to have corrected the problemI'm not sure how much more my electric bill can take after attempting to help Ramjet run fah2 up to 100 years at WCG
Senior Post Whore
I just have my 3rd AM1 system on the rails in order to cut down on the power bill. The ASUS FM1-A75 with its 100 Watt TDP A8-3850 and its HD 7790 has been delegated to emergency-only use. Think I'll install Kubuntu on it.Originally Posted by Jason1478963
I installed 32 bit libs on one of the blades and so far it seems to have corrected the problem
Last edited by Dirk Broer; 02-23-2016 at 11:23 PM.
Senior Post Whore
Looks like all blades have been sharpened, you are heading into a three figure score on Enigma today!I installed 32 bit libs on one of the blades and so far it seems to have corrected the problem
Motivator & Enthusiast
Moderator
With Jason's Help I think we are going to pass Seti.Germany!!! That is a surprise for them I bet, Jason1478963 That is some awesome server you have working for you right now. Very Impressive!
Motivator & Enthusiast
Moderator
Passed Seti.Germany and it now looks like we will capture and pass Boinc Poland. I am amazed Jason
Member
Hang on.....we're still ramping up. I just threw a few cores on to help too.
Reply With Quote
