How fast is your cpu?

[Grey]

Barton 2500 @ 2300/200fsb - XP Pro

[jonesey2k]

XP1600 pally @ 1400mhz.

[extreme]

ThermalDragon, Water Cooled|Intel P4 3.0CGhz@3763mhz with 5:4 divider on water cooling|Abit IC7-G|Corsair TWINX XMS3200 512MB (2X256)|Western Digital SE 80gb 7200rpm HDD*2|Antec TruePower 480 Watt|LiteOn 48x24x48x Cd-rw & 16x DVD-ROM|ATI 9800 pro 128mb@425/380|Win Xp home|3DMark Score: 20078

SilverDragon|2100+ "B" AIUHB Week 0302@2320mhz 10.5*220 On Epox 8RDA+|Vcore 1.875 Vdimm 2.9|(2 X 256)@441.91|SLK-800 With Vantec Tornado|Western Digital SE 80gb 7200rpm HDD|Antec TruePower 430 Watt|PNY GeForce4 Ti 4200 64mb DDR.|Exact48x/16x/48x|Windows XP Home|

[Jeff]

I have a watercooled cpu as well. However if I try to overclock, even 100mhz, i start to get errors in Prime95. Should I bump of the vcore or what
I have a xp2600(333) on viakt400 board with 1024 pc3200, 2 WD 80gb SE hdd, geforce 4 ti4200. Any suggestions?
Im running at 30c.

BTW, what team do you crunch for extreme?

[extreme]

I have a watercooled cpu as well. However if I try to overclock, even 100mhz, i start to get errors in Prime95. Should I bump of the vcore or what
I have a xp2600(333) on viakt400 board with 1024 pc3200, 2 WD 80gb SE hdd, geforce 4 ti4200. Any suggestions?
Im running at 30c.

BTW, what team do you crunch for extreme?

Ya, Bump the Vcore up a little at a time till you stop getting the errors in Prime95. Dont know how much your going to get out of a via chipset though.

I crunch for team15 www.speedguide.net

[Jeff]

I probably should have gone for the nforce2 chipset eh?

[extreme]

I probably should have gone for the nforce2 chipset eh?

Yep.

ABIT NF7-S 99 bucks at newegg.

[Anonymous]

2100+ @ 2300MHz running 200 X 11.5 using Innovatek watercooling
K7N2-Delta-ILSR (Nforce2)
2X512 DDR 3200 in dual channel
Getting 17,529 in 3dmark2001se build 330

[extreme]

_Super_10]2100+ @ 2300MHz running 200 X 11.5 using Innovatek watercooling
K7N2-Delta-ILSR (Nforce2)
2X512 DDR 3200 in dual channel
Getting 17,529 in 3dmark2001se build 330

drop the multplier and get more fsb. That chip can go alot further on watercooling that what you have it.

[Anonymous]

I have tried everything to get it higher i can only get it to about 205FSB but 200 is not bad for a 133 CPU i think. I have even lowered the FSB and raised the multiplier. The highest i have ever got this CPU was 2400MHz but could not run stable. Im pretty happy with my almost 600MHz overclock.

I also had a 2500+ barton but didnt like it as well and the most i could get out of it was 2300Mhz even though it had more cashe it didnt perform as smooth at that speed as the 2100+ does