Over clocked settings through uGuru

[Empty_5oul]

i just read it through and it is very good. lots of information. I will make it a favourite i can see i will be visiting it frequently when i try to add a little more mhz to my AMD!

was it jeff who posted this original link - its great thanks! :D

[Lagu]

Hi Empty_5oul

Yes, you reminds right. It was Spjeff69 as realeased this link years ago.

Nflight found this topic interesting and especially that link he posted was wery exiting for him.

Thank you Nflight as digged out this old cat :D

Lagu

[Lagu]

Hi

I´ve just make a printout of the first page on Li A4 because S A4 was too small so i should lose some letters on the right side. I got 9 pages and the results seems good.

Lagu

[Empty_5oul]

lagu if you apply this to the uguru machine i think there is no need for all the rebooting. I am pretty sure you have all the options within the OC guru. I havent checked yet but i know you can change a lot of numbers and voltages through it. If you can this will give you an overall better result as you can have your machine at 100% CPU all the time - so the temperatures will always be fairly accurate.

[Lagu]

Empty_5oul

I´ve only rebooted once when the Graphic Card got overheated. I´m now running HashClash and QMC without any probs. The computer is wery stable because I have over clocked by only 3 MHz from 204 to 207 so far.

I will go to my reseller tomorrow and hear what he says. The temp is far to high but am not sure uGuru shows the right temp.

Lagu

[Electabots]

Hi, thought i'd add what little I know. I'd double check your temps using the speedfan program http://www.almico.com/speedfan.php
This site/forum helped me start overclocking my board http://www.hardforum.com/showthread....1&page=1&pp=20
If you cpu is really running at 80c+ you may have a problem...mine average at 50c underload(room temp 25-27c)

Edit: Oh and the motherboard manufacturer supplied overclocking programs arn't all that great imho. I used the one from mine(called core center) and it only lets you overclock 20mhz >.> . After reading that overclocking board I linked up there I downloaded Clockgen http://www.cpuid.com/clockgen.php it works alot better but I guess it dosen't work on all motherboards

[Lagu]

Hi

Late in Yesterday I increased the speed to 2310/210 MHz. I have set V-core to 1525 first but then I notised it change between 1.52 - 1.53 so I changed V-core to 1550 V but I don´t know if it is nessesary.

The computer has crunch QMC and uFluid the whole night without any problems.

What is you guys option?

Lagu

[spikey_richie]

Run Prime95 on it just to be sure.

[Lagu]

Empty_5oul

What is the speed when you have over clocked your 3200+ 10 %?
Is it 2.400/220 MHz?
If I should over clock my computer by 10 % the speed must be 2.447 MHz and I think it is impossible to do do that. The computer should shout down.

Normal speed for my computer is 2247/204 MHz. Right now I´m running at 2.368/215 MHZ (7.66 %) over clock. This is calculated from a standard speed of 2.200 MHz.

Are your prosessor a ClawHammer?
Are you using TURBO settings?
What is your make of Graphic card?

Lagu ;)