CPU Upgrading

[Ohioemachines]

Hey guys,I'am new here and could really use some intelligent & experienced help.I'am wantin to upgrade my CPU from a AMD Sempron 3100+ processor(256KB L2 cache,1.8GHz,1600MHz system bus)

Motherboard:

FIC K8MC51G

Socket: 754

I'am wanting a faster CPU
I Currently have 2GB DDR 400MHz(PC3200) Patriot signature line memory
Antec NeoHE-550 PSU
16 x Multiformat dual-layer DVD+-RW drive
6-channel(5.1)RealTek AC97'audio
100GB(7200rpm) WD hdd
NVIDIA Crush 51 chipset
NVIDIA GeForce 7600GT 256MB PCI-E x 16

What cpu can I put into this rig?

[Beerknurd]

Check this page out. It will give you some examples... Cheers...

CLICK HERE

[Ohioemachines]

Check this page out. It will give you some examples... Cheers...

CLICK HERE

So,are you telling me that any socket 754 will do for my upgrade?I'am wanting something like a Athlon 64 at like 2.4GHz
I'am not sure which model

[Beerknurd]

Then you may have to get a motherboard that will take a socket 939 or X2.

[Ohioemachines]

Thats what I'am asking.I want to keep this board.I've been told by others that I can go up to the Athlon 64 3700+ socket 754

Just trying to makesure these people know what they're talking about.I'am on disibility and don't have money to mess up.

[Brucifer]

yes you can do an athlon 64 as long as it's a 754. A few places may have some left.

[Ohioemachines]

Thanks

[gatekeeper53]

Ohio,
Welcome to AMD Users. This is what Newegg has left in 754. http://www.newegg.com/Product/Produc...ubCategory=343
If you can go up to a 939 board you'll have a lot more choices up to and including dual cores. I have a 3700+ and 2 3500+'s I prefer the 3500+. Juat make sure that if you do go to the 939 board that it has a slot that will fit your video card some of them only support the new PCI Express.

[Strongbow]

I'am wantin to upgrade my CPU from a AMD Sempron 3100+ processor(256KB L2 cache,1.8GHz,1600MHz system bus)

Motherboard:

FIC K8MC51G

Socket: 754

Woaaahhhh there!!!

The motherboard is fine with all the sock.754 chips mentioned but it's the BIOS you need to worry about. Going by your username I'm assuming that the computer is an OEM system by emachines, is that right?

If it is an emachine system then they will have tinkered with the BIOS and I believe you will only be able to upgrade to a Sempron 3400+ and not an Athlon. If you find that some of the settings are inaccessible within the BIOS setup (greyed out) then you're in trouble and would need to flash a FIC BIOS over the emachines one to allow for Athlon chips to be used. I've had a look at the FIC site and am unable to find a BIOS update for your board so be very careful and check the BIOS before making any purchase.

Let me know how you get on.

BH

[Brucifer]

Good catch BH!! I don't use proprietary systems (Dell, eMachine, etc.) and I sorta forget about that stuff and having problems with BIOS upgrades for them for running anything other than what they want the systems to run.