Page 4 of 6 FirstFirst 123456 LastLast
Results 31 to 40 of 60

Thread: Where do I turn?

  1. #31
    Join Date
    Jul 2003
    Location
    Sydney, Australia
    Posts
    5,662
    HRM I also find EasyTune4 doesn't allow access to the buttons you hi-lighted. It would be better named HardTune :P

  2. #32
    Join Date
    Jul 2003
    Location
    Michigan, USA
    Posts
    480
    since1876, i screwed up Bionic is right that board doesnt support a 333mhz CPU. I must have been looking at the wrong one. ](*,) But yes the PC 2700 is backward compatible and will run normally with a slower bus speed.

    My apologies.

  3. #33
    Join Date
    Oct 2003
    Posts
    17
    I'LL KILL YOU CHAZ!!!!!! I'm kidding. Everyone messes up, except me, of course! Anyway, I ordered 2700 ram, I'll eventually use it's maximum capacity one day. Unless I jump over it...but oh well. Anyway, it'll clock itself down to 2100 you said, so can I use it with the other 128 or do I have to pawn that off? Either way, I don't think 128 more will be all that much more helpful, but it'd always be nice to still be able to use it.

    http://america.giga-byte.com/MotherB...al_7vkmp_e.pdf there's my manuel so you don't get confused again chaz ;)

  4. #34
    Join Date
    Oct 2003
    Posts
    17
    Quote Originally Posted by vaughan
    HRM I also find EasyTune4 doesn't allow access to the buttons you hi-lighted. It would be better named HardTune :P
    Think it's because the processor's not unlocked? I'm gonna go check out the help files and the website and see if I can figure it out.

  5. #35
    Join Date
    Jul 2003
    Location
    Michigan, USA
    Posts
    480
    Its best not to mix and match memory, but sometimes you get lucky. Try and see, you should put the largest of the two in the first dimm slot though. if you get page fault erors then they dont mix well and 1 will have to come out.

    Actually there was an XP 2800 with a 266mhz bus.......but good luck finding one at a reasonable price.

    http://www.memory4less.com/m4l_itemd...itemid=2507698

    The pc2700 will better your chances of overclocking later too.

  6. #36
    Join Date
    Oct 2003
    Posts
    17
    I found one kinda like it on newegg for like 230 I think, I just closed it but do a search for 266 fsb and you can maybe find it again...it should be on the second page.


    (edit)
    AMD Athlon MP 2800 2.08GHz PROCESSOR CPU - Retail
    Specifications:
    CPU: 2.08GHz
    Type: 2800 MP
    Cache: 512K
    Core: Barton
    BUS: 266MHz
    Socket A (PGA)
    Retail Box (with Heatsink and fan See pics) Model#: AMSN2800BOX Special Free FedEx Saver Shipping

    My brother seems to think that MPs come unlocked.. Like I said though, I'll worry about processors later.

    Just 2 or 3 more days... :fist:

  7. #37
    Join Date
    Jul 2003
    Location
    Florida,US
    Posts
    393
    you shouldn't have a problem using ddr 2100 and 2700 together also MP should be unlocked but for the price difference you could just buy a faster XP. before buying a cpu you might want to check the processors core and speed your board will support before buying.

  8. #38
    Join Date
    Oct 2003
    Posts
    17
    I take it the processor's core isn't the 266 bus thing we were talking about before then, right? I'll go take a look at that manuel again. So convenient that I posted a link to it! :D

  9. #39
    Join Date
    Jul 2003
    Posts
    390
    You need a 266mhz bus processor. That MP will work, but its more expensive than an equivalent XP Processor. The link i posted above is an XP, but even though they exist, the 2400XP would be most cost effective, they were coming unlocked last i knew and can be overclocked pretty easy too.
    I'll bet a 266 2600/2800 runs a mint

  10. #40
    Join Date
    Jul 2003
    Location
    Michigan, USA
    Posts
    480
    thats me again lots o login probs these days

Page 4 of 6 FirstFirst 123456 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •