dual channel memory

[Empty_5oul]

I have dual channel memory in my 64 system but it doesnt seem to be any faster than my "normal" memory in other machines.

How do i check to see if dual channel is enabled and / or working, from when i set my machine up i cannot remember seeing or setting anything to do with the memory.

[NeoGen]

I can't tell for sure but maybe in the BIOS settings? It's usually there where everything "low level" can be configured.

[Empty_5oul]

thanks for such a quick response i had a quick look but found nothing stating dual channel on/enabled or dual channel off/disabled

[vaughan]

Mine shows Dual channel during the POST checking.

[andrewdodd13]

Yeh my BIOS also says dual enabled a line like:

DDR Memory Clock: 333MHz (Dual-Channel Enabled)

If yours doesn't then look at the slots that the memory is installed in. The memory chips have to be the same size and clock speed (PC2700-333MHz, PC3200-400MHz, etc). Also, they have to be in certain slots. Consult your motherboard manual to find out which slots you have to put the memory in.

[Empty_5oul]

right i bought geil memory in a set, 2x 512's see here [ http://www.microdirect.co.uk/Product...608&GroupID=57 ] and my mobo [ http://www.microdirect.co.uk/Product...70&GroupID=527 ]

[meckano]

Yup, have to by them in sets, they are tested.
Did you buy them at different times? no good.

[Empty_5oul]

they are in a set so at exactly the same time and also manufactured at the same time, with same speeds and latencies + materials.

they can go in either of the two slots on my board, it can take 2 sets maximum ( 4 slots) and they are colour coded which i have re-checked and is installed sucessfully.

[Lagu]

This is my motherboard:

VIA K8T800 Pro Based AMD Athlon 64 Mainboard
The GigaSystem - 1GHz FSB and 2GHz HT,
AGP 8X, SATA RAID ABIT uGuru Technology
Specifications

CPU
Supports AMD socket 754 Athlon 64 CPU

CPU Integrated Memory Controller
72-bit memory controller supports DDR at 266, 333 and 400MHz
Support 2 DIMM DDR 400
Support 2 DIMM up to 2GB Max.

Chipset
VIA K8T800 Pro/ VT8237 chipset
The Gigasystem
Supports a 1GHz FSB and 2GHz HT
Supports Advanced Configuration and Power Management Interface (ACPI)
Accelerated Graphics Port connector supports AGP 8X/4X (0.8V/1.5V)

SATA RAID
Supports SATA data transfer rates at 150 MB/s (1.5G bps)
Supports SATA RAID 0/1 JBOD

Gigabit LAN
On board 10/100/1000 Mb PCI Ethernet Controller

Audio
6-Channel AC 97 CODEC on board
Professional digital audio interface supports optical S/P DIF In/Out

ABIT Engineered
ABIT uGuru Technology
- ABIT EQ
- ABIT OC Guru
- ABIT Flash Menu
- ABIT Black box
ABIT SoftMenu Technology
ABIT FanEQ Technology
CPU ThermalGuard™ Technology

Internal I/O Connectors
1 AGP 8X/4X slot, 5 PCI slots
Floppy Port supports up to 2.88 MB
2 x Ultra DMA 33/66/100/133 Connectors
2 x Serial ATA 150 Connectors
2 x USB headers, 2 x CD-IN

Back Panel I/O
1 x PS/2 Keyboard, 1 x PS/2 mouse
1 x Serial Port, 1 x Parallel Port
1 x S/P DIF Output, 1 x S/P DIF Input
5 holes Audio connector (Front Speaker, Line-in, Mic-in, Center/Sub, Surround Speaker)
4 x USB, 1 x RJ-45 LAN Connector

Miscellaneous
ATX form factor 305 x 225 mm

A quite good motherboard
Lagu :D

[meckano]

1GHz fsb?
am I missing something?
mine is ddr200 so, 400MHz fsb.

with what is this cpu talking to at 1GHz?