Page 1 of 7 1234567 LastLast
Results 1 to 10 of 70

Thread: No one can make fun of me anymore!!!!!!

  1. #1
    Join Date
    May 2004
    Location
    Arlington, Texas
    Posts
    5,396

    No one can make fun of me anymore!!!!!!

    I am typing this on my new system... I am officially part of the AMD Users family!!!!!


    Here are the specs.


    CPU-Z Report

    --------------------------------------------------------------------------------

    CPU-Z version 1.28.


    CPU(s)
    Number of CPUs 1

    Name AMD Athlon 64 3300+
    Code Name Paris
    Specification AMD Athlon(tm) 64 Processor 3300+
    Family / Model / Stepping F C 0
    Extended Family / Model F C
    Brand ID 4
    Package Socket 754
    Core Stepping DH7-CG
    Technology 0.13 µ
    Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE, SSE2, x86-64
    CPU Clock Speed 2411.1 MHz
    Clock multiplier x 12.0
    HTT Bus Frequency 200.9 MHz
    L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
    L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
    L2 Cache 256 KBytes, 16-way set associative, 64 Bytes line size
    L2 Speed 2411.1 MHz (Full)
    L2 Location On Chip
    L2 Data Prefetch Logic yes
    L2 Bus Width 128 bits



    Mainboard and chipset
    Motherboard manufacturer ASUSTek Computer INC.
    Motherboard model Salmon, 1.04
    BIOS vendor Phoenix Technologies, LTD
    BIOS revision 3.07
    BIOS release date 01/10/2005
    Chipset SiS 760 rev. 2
    Southbridge SiS 964 rev. 36




    Memory
    DRAM Type DDR-SDRAM
    DRAM Size 512 MBytes
    DRAM Frequency 200.9 MHz
    FSB:DRAM CPU/12
    CAS# Latency 3.0 clocks
    RAS# to CAS# 3 clocks
    RAS# Precharge 3 clocks
    Cycle Time (TRAS) 8 clocks
    Bank Cycle Time (TRC) 11 clocks
    DRAM Idle Timer 16 clocks
    # of memory modules 1
    Module 0 Micron Technology DDR-SDRAM PC3200 - 512 MBytes



    Software
    Windows version Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    DirectX version 9.0c

  2. #2
    Join Date
    Jul 2004
    Location
    Sussex, UK
    Posts
    3,734
    nice beer,

    3300 are you sure ???

  3. #3
    Nice, and welcome to the 'Light' side, errrr re "Dark" side. :D
    sorry if ya felt laughed at! not nice, not nice at all :p

    If you are into tweaking
    In my asus Bios, there is a memory setting to enable the
    1T command. I found that helped with seti classic, so still use it.
    - My memory is Premium, which is a step above standard, nothing special; not like the Corsair in this Giga-Mobo.(which has no 1T control)

    Found this:
    Command Rate This is the setting that selects the speed of the SDRAM signal controller. If set to 1T the memory controller is running in synchronization with your bus speed. 1T will increase your memory bandwidth but a LOT of memory brands will really have trouble running this at decent speeds. This setting will have to be played with a LOT while your increasing your FSB speed. It does in fact increase your memory bandwidth but will often lower your max bus speed so much that it just isn't worth using.

    From here:
    http://www.iamnotageek.com/a/1-p2.php

  4. #4
    NeoGen's Avatar
    NeoGen is offline AMD Users Alchemist Moderator
    Site Admin
    Join Date
    Oct 2003
    Location
    North Little Rock, AR (USA)
    Posts
    8,451

  5. #5
    Join Date
    May 2004
    Location
    Kent, UK
    Posts
    3,511
    3300+ Are you sure, they only made 3200+ or 3400+.

    Still.....welcome to AMD Users ;)

    Are you now going to throw your old machine away :shock:

  6. #6
    Wow, actually got my premium ram looking stable.
    from
    2.5-3-3-7
    to
    2-3-3-6, w/ 1T command

    Too bad this mobo doesn't have settings, I'd get the Corsair stuff doing magic. ;) (it's stuck at 2.5-3-3-8, 2T command :p )

    If you don't know what I am talking about, I'll say now, I don't know enough to explain it, but I make changes, run burn-in software, check temperature.
    I do Not play with voltages. No death wish here lol

  7. #7
    Join Date
    Jul 2004
    Location
    Sussex, UK
    Posts
    3,734
    thats what i meant ototero when i posted before.

  8. #8
    Join Date
    Jul 2003
    Posts
    1,524
    I am so proud of you!
    Computer Repair in Clarksville, TN
    http://ClarksvillePCRepair.com

  9. #9
    Join Date
    May 2004
    Location
    Arlington, Texas
    Posts
    5,396
    Quote Originally Posted by Ototero
    3300+ Are you sure, they only made 3200+ or 3400+.

    Still.....welcome to AMD Users ;)

    Are you now going to throw your old machine away :shock:

    3300+ is what is says on the box.... 2.4 Ghz. Yall are the experts on these things...

    Here is the exact cpu I bought...

    Beerknurd's AMD

    And no I am not throwing anything away....

  10. #10
    AMDave's Avatar
    AMDave is offline Seeker of the exit clause Moderator
    Site Admin
    Join Date
    Jun 2004
    Location
    Deep in a while loop
    Posts
    9,612
    Nice rig.

    The borged P4 sitting on the floor in my study is in exactly the same case.

    HP do a good software install and good updates and restore settins too. I only had to remove the "Internet assistant" software because it was doing random web searches and pulling in viruses and spyware like nobody's business. I'm not sure if the owner put that on there or if it was part of the original install.

    One thing - you are going to enjoy that PC.

    Congratulations.

    Welcome to the brotherhood :D


    Ototero:
    Throw away? Just how cheap are CPUs in England today ?
    Hey. Look at it this way. You can breath a sigh of relief. You can pay out your mortgage now without having to buy Beer an AMD now.
    (old joke referring to a lost thread - damn hackers)
    . . . . . ___
    . . . . . . .\___/\______
    . . . . . . . \__AMD___\\__
    ---------------------------------------------

Page 1 of 7 1234567 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •