Did a little werk this evening to setup a disk that will have my custom settings (network, workgroup, comp name, dns, archiving, multi cpu settings, etc) for my X2 4200.
I just have to dig out the network drivers for the onboard lan...
Post Whore
Did a little werk this evening to setup a disk that will have my custom settings (network, workgroup, comp name, dns, archiving, multi cpu settings, etc) for my X2 4200.
I just have to dig out the network drivers for the onboard lan...
Logic is the art of being wrong with confidence.
Post Whore
Is anyone using/looking into BOINCpe?
I may have mine on-line tonight. If that happens, I can retire a slow intel and an amd (slot A) box...
Logic is the art of being wrong with confidence.
Senior Post Whore
Moderator
As you all know the OS on my AMDAthlon64, 3200+ has been reinstalled why I now downloaded the latest Boinc-client 5.18.15.
Benchmark:
2207 Floating points (Whetstone) per Cpu
3929 Integer MIPS (Drystoe) per Cpu
Should I use Crunche3r or is it not an good idea? I have noticed before an optimised client has little favour or are I misstaken?
Once an AMDuser always an AMD user
Post Whore
I haven't been able to find a project that it helps all that much on. What will help is to up the speed on the 3200. I have one that is doing great at 2420 MHz at stock voltage and cooling and the benchmarks are better. I just brought the FSB to 220 with a multiplier of 11.
Me transmitte sursum, caledoni!
I am totally against political jokes....I've seem to many of them elected!!
Senior Post Whore
Moderator
I have overclocked the AMD from 2,2 Ghz to 2,376 MHz. I tried 2,398 ut the computer didn´t like it and made a restart instead.
FSB from 216 to 218 seems be a little step but no it always fail. I dont know what is wrong. I have 2 new twin-memorys. Before I had 2 different.
Once an AMDuser always an AMD user
Post Whore
You could up the V-Core volts but 2376 isn't to bad. I just don't feel like I'm getting my moneys worth if I don't OC. lol Of course I just had to pay for a new motherboard in my 5 month old laptop because I OC'd it. So please don't pay to much attention to me.
Me transmitte sursum, caledoni!
I am totally against political jokes....I've seem to many of them elected!!
Post Whore
Is anyone using BOINCpe? I guess I'll fire this up again as a long term project.
I got a couple of boxes of parts a few days ago (new x2 4800). I guess I'll do some werk on the BOINCpe again. I sort of abandoned it for a while...
I'll start a thread if anyone is interested....
Logic is the art of being wrong with confidence.
Motivator & Enthusiast
Moderator
I must have missed this post before, just what is this new fangled Boinc OS?
I found this link not very helpful: http://boinc-wiki.ath.cx/index.php?title=BOINCpe
Am I on the right track ?
Challenge me, or correct me, but don't ask me to die quietly.
Post Whore
That's good info. The following site has all the instructions and where to get downloads...
http://blog.schreiter.info/index.php...ecd-for-boinc/
Logic is the art of being wrong with confidence.
Senior Member
From the overclock information I have read there is a fair amount of settings you should change to get the maximum overclock out of Athlon 64 chips. the HyperTransport(LDT) multiplier, memory multiplier, PCI bus... (I had hard drive issues until I locked my pci bus) some ppl also relax the memory timings with higher FSB speeds.Originally Posted by Lagu
I have overclocked the AMD from 2,2 Ghz to 2,376 MHz. I tried 2,398 ut the computer didn´t like it and made a restart instead.
FSB from 216 to 218 seems be a little step but no it always fail. I dont know what is wrong. I have 2 new twin-memorys. Before I had 2 different.
your DDR would be running DDR432 and HyperTransport would be 1080 I believe. If your bios has multipliers/dividers for these settings you may be able to get a little more if you want to play with things. I am not an expert but I do like to try and see what some chips will do.
Posting Permissions
Reply With Quote
